Our innovative wireless system provides wireless clock correction to both analog and digital Valcom wireless clocks.  The wireless system works on 915 - 928 MHz frequency hopping technology.

The Valcom digital wireless clocks are also available in 24 VDC/VAC and 110 VAC. Similarly to the analog wireless clocks; each clock is both a transmitter and a repeater. The digital clocks transmit the signal once a minute. They are available in both 2.5" and 4.0" models. The wireless system uses our versatile transceiver (part number V-WMC) as a master clock. The transceiver features TCP/IP Internet connectivity to an atomic clock web site as well as the ability to interface with other clock systems.

A minimum of one V-WMC Wireless Master Clock Transceiver or
V-WMCR Wireless Master Clock Repeater is required per wireless clock system.

Highlights

• Receives and transmits the signal once a minute
• External clock mounted antenna
• Each clock acts as a repeater and transmitter
• 915 - 928 MHz frequency-hopping technology
• Immediate correction for time change
• Microprocessor based clock
• Clocks will not deviate from each other
• Available in 2.5" display or 4.0" display
• 12 or 24 hour format
• Two (2) levels of adjustable brightness
• Loss of communication alert
• Bright LED display
• Anti-glare red bezel
• No battery backup required
• Dynamic range for input voltages
  • 12 - 30 VDC (24 volt model)
  • 12 - 30 VAC (24 volt model)
  • 78 - 130 VAC (110 volt model)
• Energy efficient
  • 85 mA @ 24 VAC (2.5" model)
  • 30 mA @ 110 VAC (2.5" model)
  • 190 mA @ 24 VAC (4.0" model)
  • 45 mA @ 110 VAC (4.0" model)
• Designed to work in conjunction with the
  V-WMC Valcom Master Clock Transceiver
• Plug in Molex connectors
• FCC Compliant, FCC part 15 Section 15,247M
• Made in the U.S.A.