|
|
|
Wireless Analog Clocks
The analog wireless clocks are available in battery (2 "D" cell), 24 VDC/VAC and 110 VAC. Each Valcom clock receives the wireless signal and then becomes a repeater. This means each clock in an area increases the quality of the signal as it perpetuates through the building. The battery powered clocks transmit and receive the signal once every four hours (in order to conserve battery life), at 12, 4 and 8 o’clock. 24 volt and 110 volt models transmit and receive data every minute.
A minimum of one V-WMCA Wireless Master Clock Transceiver or V-WMCRA Wireless Master Clock Repeater is required per Valcom wireless clock system. Highlights
|
|
Wireless Analog Clocks
V-AW12 V-AW12A-MD V-AW12LP V-AW2412 V-AW16A V-AW11016 V-AW2416
PDF Downloads
|
Just In Time - Valcom Clocks
Wireless Analog Clocks
|
|
|||||
|
|
|||||
|
|
Our innovative wireless system provides wireless clock correction to
both analog and digital Valcom wireless clocks. The wireless
system works on 915 -928 MHz frequency hopping technology.
