Wireless Master Clock GPS Receiver

Highlights

Eight (8) channel technology
Microprocessor based
Immediate start up time
High reliability
In case of loss of signal, a temperature controlled time base is implemented allowing calibration of the time during variants in temperature
Synchronized to UTC within 500 nanoseconds
Interfaces directly with Valcom analog and digital clock systems
Capable of working as a master for Valcom 2-wire digital systems
Operation of auxiliary circuit for once-a-day relay closure with precise second resolution
Field programmable via two (2) switches
Two (2) levels of programming for technicians and end users
Ten (10) year battery backup for timekeeping
One (1) programmable signal duration per circuit (1 - 99 seconds), allowing the user to interface with other systems
Diagnostic mode allows the user to maintain and troubleshoot the clock system from the master clock
LED display
Valcom digital inputs and outputs
Rack mountable
FCC approved
Made in the U.S.A.

When used with Valcom wireless clocks, add a V-WMCR wireless master clock repeater.

When used with Valcom wired clock (2-wire correction) add V-VCU 6-Amp 2-wire clock drivers as necessary.